Instruction for assignment submissions
Failure to follow the instructions will result in a loss of marks per item. You will turn in your assignment on A4 paper, following the instructions below.
Submission in paper are due at the beginning of class on the day the assignment is due.
Submission in paper are due at the beginning of class on the day the assignment is due.
Papers Submission
- Your paper submission will be organized as follows: A cover sheet on top with J5800, the assignment number, your name, and your matrix number. Order your papers in the order of the questions/problems given.
- You'll include all questions/problems given in the assignment.
- Comb binding all your printouts as a single submission. All pages must be in COLOUR.
- Note that from now onward copied assignments will be rejected outright and zero (0) mark will be given
- Show the complete process to solve the question; otherwise you will not get full marks.
- If you write only the answer without any process, the question will not be taken as solved properly.
Marking Scheme for Assignment
In an attempt to simplify and make more consistent the marking of the various assignments, they will all be marked on a grid scale of 0 to 5, with 0 being a fail and 5 being outstanding. The required translation to a numeric mark from that scheme is also listed below. The marking scheme will follow the outline below:
| Score | Criteria |
| 5 = 97- 100% 4.5 = 92% | The assignment not only answers all questions and addresses all topics but shows depth of understanding and/or additional insights. References are appropriate and included. |
| 4 = 87% 3.5 = 82% | The assignment is accurate on its surface and all questions/topics are answered or addressed. References are appropriate and included. Or, it is of score 5 quality but references are not included or are not accurately displayed |
| 3 = 77% 2.5 = 72% | The assignment has one or more inaccuracies or something is missing. However, the references used are appropriate and included. Or, report is of score 4 quality but references are not included or are not accurately displayed |
| 2 = 67 1.5 = 62% | The assignment is incomplete or inaccurate. One or more questions or topics is missed or incorrectly answered. Or the report is of score 3 quality but references are not included or are not accurately displayed |
| 1 = 57% 0.5 = 50% | The assignment shows a lack of effort and is of inferior quality. Topics are missing, incorrectly answered, or addressed superficially. Or, it is of score 2 quality but there are missing or inaccurately displayed references. Or, it is of scores 5, 4, 3, or 2, quality but is sloppy, unreadable, and gives little evidence of a serious effort for the assignment. |
| 0 = 30% | The assignment is of very poor quality. Topics are missing, or it does not address many of the topics adequately, or some parts of the answer are not attributed to the sources used. Or, it is of scores 1, 2. 3, or 4 quality but there are many missing and inaccurate references or the references actually used are not acknowledged. |
Good Luck!
COVER PAGE FORMAT
CASE STUDY FORMAT
Title Page
Executive Summary - 10%
Introduction - 10%
Literature Review - 15%
Methodology - 10%
Study - 15%
Analysis - 15%
Conclusions & Recommendations - 15%
References & Appendices - 10%
ASSIGNMENT 1
(CASE STUDY 1)
(CASE STUDY 1)
Due Date : 13 April 2012, 12.00 noon, Zero (0) mark will be given for the late submission/did not submit, submit by hand & signature before submit
Question / Soalan
Title : Measurement Systems
Interpret performance terminology used in the specifications
of instrumentation.
(Tafsirkan istilah prestasi yang digunakan dalam spesifikasi
instrumentasi)
Question / Soalan
Title : Instrumentation system element
Describe and evaluate sensors, signal processing and display
elements commonly used with instrumentation used in the
measurement of position, rotational speed, pressure, flow, liquid
level and temperature.
(Huraikan dan nilaikan sensor, pemprosesan isyarat dan paparan
unsur-unsur yang biasa digunakan dengan instrumentasi yang
digunakan dalam pengukuran kedudukan, kelajuan putaran,
tekanan, aliran, cecair tahap dan suhu)
Question / Soalan
Title : Measurement Systems
Interpret performance terminology used in the specifications
of instrumentation.
(Tafsirkan istilah prestasi yang digunakan dalam spesifikasi
instrumentasi)
Question / Soalan
Title : Instrumentation system element
Describe and evaluate sensors, signal processing and display
elements commonly used with instrumentation used in the
measurement of position, rotational speed, pressure, flow, liquid
level and temperature.
(Huraikan dan nilaikan sensor, pemprosesan isyarat dan paparan
unsur-unsur yang biasa digunakan dengan instrumentasi yang
digunakan dalam pengukuran kedudukan, kelajuan putaran,
tekanan, aliran, cecair tahap dan suhu)
Page : minimum 20 pages
Font : Times New Roman - 12,
Spacing : 1.5 spacingASSIGNMENT 2
(CASE STUDY 2)
Due Date : 13 April 2012,12.00 noon, Zero (0) mark will be given for the late submission/did not submit, submit by hand & signature before submit
Question / Soalan
Title : Instrumentation
Explain how system elements are combined in instrumentation for some
commonly encountered measurements.
(Jelaskan bagaimana unsur-unsur sistem digabungkan dalam
instrumentasi bagi sesetengah ukuran yang biasa ditemui)
Question / Soalan
Title : Control systems
Explain what is meant by open and closed-loop control systems, the
differences in performance between such systems and explain the
principles involved in some simple examples of such systems.
(Jelaskan apa yang dimaksudkan dengan sistem kawalan gelung
terbuka dan tertutup, perbezaan prestasi antara sistem itu dan
terangkan prinsip yang terlibat dalam beberapa contoh mudah
sistem itu.)
Due Date : 13 April 2012,12.00 noon, Zero (0) mark will be given for the late submission/did not submit, submit by hand & signature before submit
Question / Soalan
Title : Instrumentation
Explain how system elements are combined in instrumentation for some
commonly encountered measurements.
(Jelaskan bagaimana unsur-unsur sistem digabungkan dalam
instrumentasi bagi sesetengah ukuran yang biasa ditemui)
Question / Soalan
Title : Control systems
Explain what is meant by open and closed-loop control systems, the
differences in performance between such systems and explain the
principles involved in some simple examples of such systems.
(Jelaskan apa yang dimaksudkan dengan sistem kawalan gelung
terbuka dan tertutup, perbezaan prestasi antara sistem itu dan
terangkan prinsip yang terlibat dalam beberapa contoh mudah
sistem itu.)
Page : minimum 20 pages
Font : Times New Roman - 12,
Spacing : 1.5 spacingASSIGNMENT 3
(CASE STUDY 3)
Due Date : 13 April 2012, 12.00 noon, Zero (0) mark will be given for the late submission/did not submit, submit by hand & signature before submit
Question / Soalan
dalam kawalan "proportional", "derivative" dan "integral".
Terangkan bagaimana P.I.D boleh dikawal dan bagaimana pengawal
boleh ditala.)
Question / Soalan
Title : Correction elements
Describe common forms of correction/regulating elements used in
control systems.
(Huraikan bentuk biasa dalam pembetulan / mengawal selia elemen yang
digunakan dalam sistem kawalan.)
Describe the forms of commonly used pneumatic/hydraulic and
electric correction elements.
(Huraikan bentuk pneumatik biasanya digunakan / hidraulik dan
pembetulan elemen elektrik.)
(CASE STUDY 3)
Due Date : 13 April 2012, 12.00 noon, Zero (0) mark will be given for the late submission/did not submit, submit by hand & signature before submit
Question / Soalan
Title : Process controllers
Describe the function and terminology of a process controller and the
use of proportional, derivative and integral control laws. Explain P.I.D
control and how such a controller can be tuned.
(Jelaskan fungsi dan istilah pengawal proses dan penggunaannyadalam kawalan "proportional", "derivative" dan "integral".
Terangkan bagaimana P.I.D boleh dikawal dan bagaimana pengawal
boleh ditala.)
Question / Soalan
Title : Correction elements
Describe common forms of correction/regulating elements used in
control systems.
(Huraikan bentuk biasa dalam pembetulan / mengawal selia elemen yang
digunakan dalam sistem kawalan.)
Describe the forms of commonly used pneumatic/hydraulic and
electric correction elements.
(Huraikan bentuk pneumatik biasanya digunakan / hidraulik dan
pembetulan elemen elektrik.)
Page : minimum 20 pages
Font : Times New Roman - 12,
Spacing : 1.5 spacing